Before You Start
Before installing your system, read and understand the safety instructions on page ii (inside front cover). Be sure you have all the necessary parts, tools, and test equipment, listed below.
1.Read important Safety Information on Page ii.
2.Check Shipping Container Contents.
nCall Stacker Unit
nMounting Hardware (screws and brackets)
nPower Cord
nThis Installation and Use Guide
3. Have Required Tools
The following tools are required for the installation of the hardware and cabling.
nPhillips screwdriver (small and large)
nStandard blade screwdriver (small and large)
nWire strippers (24 AWG - 12 AWG)
nTelephone test set
nTone out circuit tester (optional, for troubleshooting)
n
n4 wood screws, if mounted on wall
4.Verify Interface Compatibility with Telephone System and Paging System (see Table
Overview