Map Channels to Switch Extensions
3.Press F3 (Assign) to display the assignment options.
NOTE:
The channel may be in any state for this procedure.
The system responds with the Assign screen, as shown in Figure
Figure A-2. Assign Screen
4.Select Channel to PBX Extension from the Assign screen.
5.Press ENTER to display the screen to map the channels to the extensions.
The system responds with the Channel to PBX Extension screen, as shown in Figure
Figure A-3. Channel to PBX Extension Screen
6.Enter the switch extension for the appropriate channel in the PBX Extension field of the Channel to PBX Extension screen. Use the worksheet listing the channels and extensions. The extension number may have up to 7 digits.
! CAUTION:
If the mapping is incorrect, some or all of the channels may be answered with the incorrect service or greeting.
NOTE:
Typing over the previous entry removes the old numbers from the fields. It is not necessary to use the DELETE or backspace keys on the keyboard.
7.Enter the appropriate channel number in the Channel field.
8.Press F3 (Save).
Issue 1 June 2000