Vintage Design Telephone with Caller ID | V10M10_IM_EN_01282008 |
OPERATIONAL INSTRUCTIONS
Phonebook Review
-Under
-When the LCD displays “SEARCH”, press ▲UP or ▼DOWN to review the phonebook number or
-Enter the letter of the name by using keypad, the wanted telephone number will display on LCD, press ▲UP or ▼DOWN to review one by one
-Press [FLASH] to exit the phonebook review
Phonebook Input
-Press [BOOK] twice continuously, the LCD will display “EDIT”
-Press ▲UP or ▼DOWN and the LCD will display “PLS INPUT NUMBER”.
-Input the desired directly by using keypad.
-Press the BOOK button to confirm
-Then the LCD will display “PLS INPUT NAME”, use the key pad to enter the name (at most 16 letters) and use the DEL button to correct (For example: enter “C”, just continuously press [2] key three times )
-Press the BOOK button to confirm
-Repeat the steps to input another name and number
-When “MEMEORY FULL” displays on the LCD, it means the phonebook memory is full, no more new name and number can be input
-Press the DEL button to exit the phonebook input
Phonebook Delete or Edit
-When reviewing the phonebook record, press the DEL button twice to erase the record.
-When reviewing the phonebook record, press the BOOK button to enter edit
-The LCD will display “EDIT”, press ▲UP or ▼DOWN and the LCD will display “PLS INPUT NUMBER”.
-Input the desired directly by using keypad.
-Press the BOOK button to confirm
-Then the LCD will display “PLS INPUT NAME”, use the key pad to enter the name (at most 16 letters) and use the DEL button to correct (For example: enter “C”, just continuously press [2] key three times )
-Press the BOOK button to confirm
Set Auto IP On/Off
-Under
-For example, if the IP number is 234567 and the long distance code is 1, press ▲UP for three seconds to set IP ‘On’ and the LCD will display
-Press ▲UP for three seconds again to set IP ‘Off’
- 13 - | www.jWIN.com |