Vintage Design Telephone with Caller ID | V10M10_IM_EN_01282008 |
TROUBLESHOOTING & SPECIFICATIONS
Troubleshooting
•No Display on LCD Screen
oBrightness on display may be turned down.
Increase brightness level.
oNo batteries or batteries are improperly installed.
If no batteries, install three (3) AA batteries as directed or
Install optional AC Adapter
Make sure batteries observe to polarities
•No Dial Tone when handset is picked up
oPhone may not be connected properly.
Make sure the handset jack is connected to the base jack using the colied wire.
Make sure the base jack
oTelephone service may be interrupted by the telephone company
Contact your telephone company to check the status of your service.
•Static or interruptions during phone conversation
oBad connection between phones
Hang up and dial number again
oHarsh weather conditions and/or lightning
Hang up and dial number when weather conditions improve
•Can only receive incoming calls and cannot make outgoing calls
oTelephone service may be limited or suspended by your telephone company
Contact your telephone company to check the status of your service.
Specifications
•Inputs & Outputs
oTelephone line jack
oHandset jack
oDC Power input jack
•Power Sources
o9V (AC/DC) Power Adapter
o 4.5V DC Battery (AA x 3) (for backup)
- 17 - | www.jWIN.com |