Vintage Design Telephone with Caller ID | V10M10_IM_EN_01282008 |
OPERATIONAL INSTRUCTIONS
Dialing from Two-Touch Memories
-Under
“INPUT ADDR”
-Press the desired
-Press the SET/BACK button and the number will be dialed out automatically.
-Under
“INPUT ADDR”
-Press the desired
Deleting a Two-Touch Memory Number
-Under
“INPUT ADDR”
-Press the desired
-Press the DEL button twice to erase the number and the LCD will display “NO CODE”
Forwarding a Call to an Extension Line
-When the call forwarding to extension line was set as “ON”, under DTMF mode, if you want to transfer the call to the extension line, press “＊” and then press the extension number
-You will here the ‘beep’ sound and wait for the extension line to receive the call
-When the extension line is received successfully, you may have conference call with the extension line and the third party or just place back the handset to complete the call. The extension line and the third party can continue the conversation.
Note:1. You must forward the call to extension line within one minute after picking the phone, otherwise, the forwarding function will be exit automatically.
2.When entering the extension number, wait one second between the digits.
3.When entering the extension number, if wait more than 10 seconds between the digits, the call forwarding will be cancelled automatically.
VIP Function
-When reviewing the incoming call, press the AUTO/VIP button once to save this number as VIP.
-When there is an incoming call, the VIP ringer melody will indicate this is the caller from VIP.
-VIP cannot be erased from the caller Id list
-If you want to cancel the VIP of the number, press the AUTO/VIP button again.
- 15 - | www.jWIN.com |