Lenoxx Electronics PH559 operating instructions Telephone Features, Memory Dialing

Page 12

TELEPHONE FEATURES

Memory Dialing

You can quickly dial the numbers you stored into the 3 one-touch speed dial buttons or 10 two-touch speed dial memories.

STORING PHONE NUMBER INTO MEMORY

1.Press the STORE button. (short for programming) appears on the display.

2.Dial the phone number you want to store. You can store up to 22 digits (including a

TONE ( ) and a PAUSE (REDIAL/PAUSE), each of which is counted as one digit).

3.For 3 one-touch dialing: Press one of the 3 one-touch speed dial buttons (M1 to M3).

For 10 two-touch dialing:

Press AUTO button, and then press one of the dialing keys (0 to 9) to store a phone number in.

4.The stored number and the location will be shown in the display.

5.Press the STORE button or wait 3 seconds to resume normal display.

6.Repeat steps 1 to 5 to store numbers into other memory locations.

NOTE

When the batteries are dead or removed for more than five minutes, the stored numbers may be erased.

TIP 1: If you entered a wrong number, you may press the STORE button, then start from the beginning.

TIP 2: If you want to store a calling card number into one of your memories, you may do this the same way you program a phone number into memory. Also if you need a pause in the number, simply press the REDIAL/PAUSE button on your phone.

To store a number to be dialed via Private Branch Exchange (PABX)

Before entering a phone number in Step 2 in Storing phone number into memory, do as follows:

1.Enter the outside line access digit (e.g., 9).

2.Press REDIAL/PAUSE button (for a pause).

To check the stored number

While the handset is on the base, press the desired one-touch speed dial button, or press the AUTO button and the desired two-touch memory number (0 to 9).

The stored number appears on the display for 3 seconds.

To change a stored number

Just store a new number, as described above, the old number will be erased automatically.

MAKING CALLS WITH 3 ONE-TOUCH SPEED DIALING BUTTONS

1.Pick up the handset or press the SPEAKER button.

2.Press one of the one-touch speed dial buttons (M1 to M3).

3.The phone will dial the numbers you stored into it.

MAKING CALLS WITH 10 TWO-TOUCH SPEED DIALING LOCATIONS

1.Pick up the handset or press the SPEAKERPHONE button.

2.Press the AUTO button first.

3.Press the desired two-touch memory number (0 to 9).

10IB-PH559(9803C)-WM-E-042602

Image 12
Contents Memory Call Waiting Caller ID Speaker Telephone Operating InstructionsTable of Contents For customer service Important Safety InstructionsBattery Safety Instructions Important Telephone Company & FCC Information Location of Controls 18 19 20Checking the Package Contents Getting StartedPowering the Phone Using BatteriesTelephone Installation Setting up the TelephoneConnecting the Telephone Setting UP LCD CONTRAST, LANGUAGE, Area CODE, Time and DateBasics Choosing Tone or Pulse DialingMaking and Receiving Calls Making a CallVolume Control and Ringer Setting Hands-Free Speakerphone OperationLast Number Redialing and Pause Function Telephone Features Memory DialingCaller ID Features Understanding the Caller ID Service When You Received a CallCall Waiting Viewing the Caller ID ListCaller ID Features Calling Back From the Caller ID ListStoring the Phone Numbers from the Caller ID List Using Message Waiting/Mailbox Deleting the Data from the Caller ID ListWall Mounting Slide OUT Reverse Replace Into PhoneInstallation on Masonry P O R TA N TTrouble Shooting Trouble Shooting Limited Warranty