Lenoxx Electronics PH559 operating instructions Telephone Installation, Setting up the Telephone

Page 9

GETTING STARTED

Step 3: Telephone Installation

CONNECTING THE TELEPHONE

 

HANDSET

1. Connect the handset coiled cord to the HANDSET

 

BACK OF THE

and the side of the phone.

WALL JACK

 

 

 

TELEPHONE

 

 

2. Connect the straight telephone line cord to the LINE CORD jack (back of phone) and telephone outlet on the wall.

If your telephone outlet is not modular, contact your telephone company for assistance.

(If you want to mount the telephone on the wall, see Wall Mounting on page 14.)

Step 4: Setting up the Telephone

SETTING UP LCD CONTRAST, LANGUAGE, AREA CODE, TIME AND DATE

You may need to set up the LCD contrast level, language, area code, time and date for your telephone when you power your phone for the first time or when you move to an area that has a different area code. This is necessary because the phone must distinguish local or long distance calls to properly dial calls from the Caller ID list.

Press and hold the DELETE button down, then press the DOWN button, the following will show in the display (FIG. 1). Release the DELETE button, press the UP or DOWN button to choose the LCD contrast level (1-4). Press the DELETE button to confirm and accept. Then the display will come to the language setting.

The default language “E” (“E” = English; “F” = French; “S” = Spanish) will flash (FIG 2).

FIG. 1

FIG. 2

FIG. 3

Press the UP or DOWN button to choose your desired language (flashing). Press the DELETE button to confirm and accept. If you do not press the DELETE button within 15 seconds, English will be selected automatically.

Then the display will ask you to set your Area Code: While the first digit is flashing, you should:

1.Press the UP button till the first digit of your area code is displayed (flashing).

2.Press the DELETE button to accept and go to the next digit.

3.Repeat steps 1 and 2 above to set the 2nd and 3rd digits of your area code.

NOTE: At any time during setup, you may just pick up the handset or press the SPEAKER button to dial or receive a call.

NOTE: If you make a mistake, you can just do it over again or call customer service for help.

AREA CODE EXAMPLE: 718

Press UP & DELETE to set

Press UP & DELETE to set

Press UP & DELETE to set

7IB-PH559(9803C)-WM-E-042602

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Operating Instructions Memory Call Waiting Caller ID Speaker TelephoneTable of Contents Important Safety Instructions For customer serviceBattery Safety Instructions Important Telephone Company & FCC Information 18 19 20 Location of ControlsGetting Started Checking the Package ContentsUsing Batteries Powering the PhoneSetting up the Telephone Telephone InstallationConnecting the Telephone Setting UP LCD CONTRAST, LANGUAGE, Area CODE, Time and DateChoosing Tone or Pulse Dialing BasicsMaking and Receiving Calls Making a CallVolume Control and Ringer Setting Hands-Free Speakerphone OperationLast Number Redialing and Pause Function Memory Dialing Telephone FeaturesWhen You Received a Call Caller ID Features Understanding the Caller ID ServiceCall Waiting Viewing the Caller ID ListCaller ID Features Calling Back From the Caller ID ListStoring the Phone Numbers from the Caller ID List Deleting the Data from the Caller ID List Using Message Waiting/MailboxSlide OUT Reverse Replace Into Phone Wall MountingP O R TA N T Installation on MasonryTrouble Shooting Trouble Shooting Limited Warranty
Top Page Image Contents