TELEPHONE FEATURES
Memory Dialing
You can quickly dial the numbers you stored into the 3
STORING PHONE NUMBER INTO MEMORY
1.Press the STORE button. 
(short for programming) appears on the display.
2.Dial the phone number you want to store. You can store up to 22 digits (including a
TONE ( 
) and a PAUSE (REDIAL), each of which is counted as one digit).
3.For 3
For 10 two-touch dialing:
Press AUTO button, and then press one of the dialing keys (0 to 9) to store a phone number in.
4.The stored number and the location will be shown in the display.
5.Press the STORE button or wait 3 seconds to resume normal display.
6.Repeat steps 1 to 5 to store numbers into other memory locations.
NOTE
When the batteries are dead or removed for more than five minutes, the stored numbers may be erased.
TIP: If you entered a wrong number, you may press the STORE button, then start from the beginning.
To store a number to be dialed via Private Branch Exchange (PABX)
Before entering a phone number in Step 2 in Storing phone number into memory, do as follows:
1.Enter the outside line access digit (e.g., 9).
2.Press REDIAL button (for a pause).
To check the stored number
While the handset is on the base, press the desired
The stored number appears on the display for 3 seconds.
To change a stored number
Just store a new number, as described above, the old number will be erased automatically.
MAKING CALLS WITH 3 ONE-TOUCH SPEED DIALING BUTTONS
1.Pick up the handset or press the SPEAKER button.
2.Press one of the
3.The phone will dial the numbers you stored into it.
MAKING CALLS WITH 10 TWO-TOUCH SPEED DIALING LOCATIONS
1.Pick up the handset or press the SPEAKERPHONE button.
2.Press the AUTO button first.
3.Press the desired
10 |
| |
|