Lenoxx Electronics PH-549 operating instructions Trouble Shooting

TROUBLE SHOOTING (continued)

PROBLEMS			CHECK
			You picked up the phone before the second ring,
appears on the display			or your phone received unclear call information.
			Static can cause this message.
			If this condition persists, contact your local tele-
			phone company to ensure that there is no prob-
			lem with your phone line.
			The DELETE button must be quickly pressed twice
Cannot erase all records in memory			to erase a single call record. To erase ALL call
			records, display any record using the UP or DOWN
			button, then press and hold the DELETE button
			for about 6 seconds.
Call waiting does not show the number			If an extension phone was pickup up on call 1,
			this phone will not decode the call waiting, Caller
			ID signals, if the extension phone is not a call
			waiting caller ID phone.
Caller ID displays words like		,	Your language is set for French or Spanish. To
or	or	or	reset the language, press and hold the DELETE
.			button down, the display will go to the contrast
			level setting, press delete again then press the
			DOWN button. When is flashing, press DE-
			LETE button to confirm. The language will be set
			to English mode.
			Check if you have stored the numbers correctly
Memory Dialing does not work			by pressing that memory location button(s). Also
			numbers can only be stored when fresh batteries
			are installed correctly.
Handset falls out of phone base when wall			Handset clip was not installed properly for wall
mounted			use. See page 13 for details.
Caller’s information is not registered to the			The caller may have an unlisted or blocked num-
			ber to prevent Caller ID identification, or it may be
Caller ID memory
			an overseas call or you may have noise on the
			line during that call.
Call Waiting or Message Waiting does not			Check with your telephone company if this service
work			is available and if you have subscribed for it.
Pressing a Memory button does not			Your MEMORY button has no stored number.
display number			Please store the number again. Press the STORE
			button, dial the number and press the MEMORY
			locations you want.

NOTE :

1.If problems with your telephone service occur later, try to determine if the trouble is with the telephones you own or with the telephone company equipment. Unplug the tele- phone and try it on another jack in a different room or in a neighbor’s home to see if the phone line is bad or the phone.

If the known working phone does not operate properly on that line, contact your local telephone company for assistance.

2.If disconnection of your phone ends the problem, your phone may be the source of the trouble and it should be tested and repaired if necessary before it is re-connected.

3.There are no user maintainable parts or adjustments on this set. Should your phone require repairing, contact the manufacturer for instructions (except for cords which you can buy at any phone store).

16 PH-549042100RTTv.2 E