Grandstream Networks GXP Series manual Handset, Speakerphone and Headset Mode, Completing Calls

Page 16

MAKING PHONE CALLS

Handset, Speakerphone and Headset Mode

Handset can be toggled between Speaker and Headset. To switch between Handset and Speaker/Headset, press the Hook Flash in the handset cradle or press the SPEAKER button.

Multiple SIP Accounts and Lines

GXP can support up to six independent SIP accounts depending on the product model. Each account is capable of independent SIP server, user and NAT settings. Each of the line buttons is “virtually” mapped to an individual SIP account. The name of each account is conveniently printed next to its corresponding button. In off-hook state, select an idle line and the name of the account (as configured in the web interface) is displayed on the LCD and a dial tone is heard.

For example: Configure ACCOUNT 1 and ACCOUNT 2 with Account Name as “VoIP 1”, “VoIP 2”, respectively and ensure that they are active and registered. When LINE1 is pressed, you will hear a dial tone and see “VoIP 1” on the LCD display; when LINE2 is pressed, you will hear a dial tone and see “VoIP 2” on the LCD display.

To make a call, select the line you wish to use. The corresponding LINE LED will light up in green. User can switch lines before dialing any number by pressing the same LINE button one or more times. If you continue to press a LINE button, the selected account will circulate among the registered accounts.

For example: when LINE1 is pressed, the LCD displays “VoIP 1”; If LINE1 is pressed twice, the LCD displays “VoIP 2” and the subsequent call will be made through SIP account 2.

Incoming calls to a specific account will attempt to use its corresponding LINE if it is not in use. When the “virtually” mapped line is in use, the GXP will flash the next available LINE (from left to right or from top to bottom for Multi Purpose Keys) in red. A line is ACTIVE when it is in use and the corresponding LED is red.

Completing Calls

There are six ways to complete a call:

1.DIAL: To make a phone call.

Take Handset/SPEAKER/Headset off-hook

or press an available LINE key (activates speakerphone) or press the NEW CALL soft-key.

The line will have a dial tone and the primary line (LINE1) LED is red. If you wish, select another LINE key (alternative SIP account).

Enter the phone number

Press the SEND key

or press the “DIAL” soft-key.

2.REDIAL: To redial the last dialed phone number.

When redialing the phone will use the same SIP account as was used for the last call. Thus, when the third SIP account was made for the last call/call attempt, the phone will use the third account to redial.

Take Handset/SPEAKER/Headset off-hook or

press an available LINE key (activates speakerphone), the corresponding LED will be red.

Press the SEND button

or press the REDIAL soft-key.

Grandstream Networks, Inc.

GXP User Manual

Page 16 of 40

 

Firmware 1.1.6.16

Last Updated: 05/2008

Image 16
Contents Page Table of Figures GUI Interface Examples Welcome Installation Connecting Your PhoneEquipment Packaging GXP-2000 Extension UnitConnecting the GXP-2000AND the GXP-EXTENSION Safety Compliances WarrantyProduct Overview GXP Product ModelsGXP Key Features in a Glance GXP Comparison GuideGXP Hardware Specifications GXP Technical SpecificationsFeature Keys Telephony FeaturesProtocol SupportUpgrades Server FeaturesNetwork Provisioning Using the GXP SIP Enterprise Phone Getting Familiar with the LCD LCD Buttons LCD IconsAM PM GXP Keypad Buttons SendHandset, Speakerphone and Headset Mode Multiple SIP Accounts and LinesCompleting Calls Making Phone CallsSpeed Dial Making Calls using IP Addresses For exampleReceiving Calls Do Not DisturbCall Waiting/ Call Hold Mute/DeleteVoice Messages Message Waiting Indicator Way ConferencingBusy Lamp Field Initiate a Conference CallCall Features GXP Call FeaturesXML Phonebook Customized LCD Screen & XMLCustomizable Idle Screen and Soft-buttons Configuration VIA Keypad Configuration GuideKey Pad Configuration Menu Configure Factory Functions Reboot Exit Audio UpgradeFactory Reset Layer 2 QoS Configure Vlan TagsKEY PAD GUI Call Flow Firmware Last Updated 05/2008 Configuration VIA WEB Browser Access the Web Configuration MenuDefinitions Device Configuration Status Device Configuration Basic SettingsDate Display Format Display Clock instead DateDaylight Savings Time LCD BacklightAdvanced Settings Via Tftp Server Via Http Authenticate Conf File Automatic Upgrade Phonebook Idle Screen XML DownloadFirmware Last Updated 05/2008 SIP Account Settings Firmware Last Updated 05/2008 Firmware Last Updated 05/2008 Saving the Configuration Changes Rebooting the Phone RemotelySoftware Upgrade & Customization Web Configuration InterfaceFirmware Upgrade Through TFTP/HTTP Key Pad MenuInstructions for local Tftp Upgrade Managing Firmware and Configuration File DownloadConfiguration File Download Restore Factory Default Setting Instructions for Restoration