Grandstream Networks GXP Series manual Configuration Guide, Configuration VIA Keypad

Page 23

Configuration Guide

The GXP can be configured in two ways. Firstly, using the Key Pad Configuration Menu on the phone; secondly, through embedded web-configuration menu.

CONFIGURATION VIA KEYPAD

To enter the MENU, press the round button. Navigate the menu by using the arrow keys: up/down and left/right. Press the OK button to confirm a menu selection, delete an entry by pressing the MUTE/DEL button. The phone automatically exits MENU mode with an incoming call, the phone is off-hook or the MENU mode if left idle for 20 seconds.

Press the MENU button to enter the key the Key Pad Menu. The menu options available are listed in table 8.

Table 12: Key Pad Configuration Menu

Call History

Status

Phone Book LDAP Directory Instant Messages Direct IP call

Preference

Displays histories of incoming, dialed and missed calls.

Displays the network status, account statuses, software version and MAC-address of the phone.

Displays the phonebook Displays the LDAP directory Goes to voice messages Displays the IP-call options menu

Press Menu button to enter this sub menu including

Do NOT Disturb

DND (Do NOT Disturb) function could be turned on or off in the “DO NOT Disturb” menu.

Ring Tone

Choose different ring tones in the “Ring Tone” menu.

Ring Volume

Press Menu button to hear the selected ring volume, press or to hear and adjust the ring tone volume.

LCD Contrast

Download SCR XML

The phone will download the custom idle screen (if available)

Erase Custom SCR

Custom idle screen will be erased and will be replaced with default Grandstream logo.

Press Menu button to choose the menu item.

Press ‘←’ to return to the main menu.

Grandstream Networks, Inc.

GXP User Manual

Page 23 of 40

 

Firmware 1.1.6.16

Last Updated: 05/2008

Image 23
Contents Page Table of Figures GUI Interface Examples Welcome GXP-2000 Extension Unit InstallationConnecting Your Phone Equipment PackagingConnecting the GXP-2000AND the GXP-EXTENSION Warranty Safety CompliancesGXP Product Models Product OverviewGXP Comparison Guide GXP Key Features in a GlanceGXP Technical Specifications GXP Hardware SpecificationsSupport Feature KeysTelephony Features ProtocolProvisioning UpgradesServer Features NetworkLCD Icons Using the GXP SIP Enterprise PhoneGetting Familiar with the LCD LCD ButtonsAM PM Send GXP Keypad ButtonsMaking Phone Calls Handset, Speakerphone and Headset ModeMultiple SIP Accounts and Lines Completing CallsSpeed Dial For example Making Calls using IP AddressesMute/Delete Receiving CallsDo Not Disturb Call Waiting/ Call HoldInitiate a Conference Call Voice Messages Message Waiting IndicatorWay Conferencing Busy Lamp FieldCustomized LCD Screen & XML Call FeaturesGXP Call Features XML PhonebookCustomizable Idle Screen and Soft-buttons Key Pad Configuration Menu Configuration GuideConfiguration VIA Keypad Layer 2 QoS Configure Vlan Tags Configure Factory Functions Reboot ExitAudio Upgrade Factory ResetKEY PAD GUI Call Flow Firmware Last Updated 05/2008 Definitions Access the Web Configuration MenuConfiguration VIA WEB Browser Device Configuration Basic Settings Device Configuration StatusLCD Backlight Date Display FormatDisplay Clock instead Date Daylight Savings TimeAdvanced Settings Via Tftp Server Via Http Idle Screen XML Download Authenticate Conf File Automatic Upgrade PhonebookFirmware Last Updated 05/2008 SIP Account Settings Firmware Last Updated 05/2008 Firmware Last Updated 05/2008 Rebooting the Phone Remotely Saving the Configuration ChangesKey Pad Menu Software Upgrade & CustomizationWeb Configuration Interface Firmware Upgrade Through TFTP/HTTPConfiguration File Download Managing Firmware and Configuration File DownloadInstructions for local Tftp Upgrade Instructions for Restoration Restore Factory Default Setting