Cortelco 879015-TP2-27S Connecting the Telephone Line Cords, Desktop Usage, Wall Mounting

Page 10

Connecting the Telephone Line Cords

One coiled handset cord and a long straight telephone line cord are packed with this unit. Insert one modular plug of the coiled cord into the handset jack and the other plug into the jack on the left side of the base. Similarly, insert one modular plug of the straight telephone cord into the Line Modular Jack at the rear end of the base and the other plug into the telephone wall jack as shown in Figure 3.

Figure 3

If your phone system is hard-wired (does not use jack), you must install an RJ11W modular jack. These jacks are available from your local telephone company or from an electronic and hardware retailer. If you have the older style 4 pin jacks, adaptors are available to convert them to modular style jacks.

Desktop Usage

1.Attach the supplied Desk / Wall Mount Bracket onto the bottom of the telephone (as shown below), if you want to change the angle of the display.

NOTE: Arrow signs are printed both on the Desk / Wall Mount Bracket and the bottom of the telephone.

2.Make sure the arrow signs are matched between the bracket and the bottom of the telephone. “FOR DESK USE PUT BRACKET HERE” is printed on the bottom of the telephone for desk mount installation. Locate and snap the tabs into place as shown in Figure 4.

Figure 4

Wall Mounting

There are two different methods for installing the base as follows:

- 9-

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Sentry Important Safety Instructions Telephone Connection Requirements FCC InformationNotification to the Telephone Company Incidence of HarmGeneral InstallationChanges in Telephone Company Equipment or Facilities This Telephone has Been Certified AS Hearing AID CompatibleBatteries Cautionary Instructions Read this manual carefully before using this product Introduction to Caller ID InstructionsControls and Features ControlsFeatures CID Type I / II FeaturesInstalling the Batteries Power SuppliesOperating from the AC-DC Adaptor Desktop Usage Connecting the Telephone Line CordsWall Mounting Page Setting the Long Distance Code Setting the ContrastSetting the Language Customizing Your PhoneSet Date Setting the Area CodeSet Time Clear Message WaitingReset your phone Telephone Operation Flash Button #4 Handset Volume Control #14Call Timer Hold Button #10To delete the Last Dialed Number Predialed CallTemporary Tone Dialing To save a number to the one-touch memory key M1 M3 Using the Memory KeysMemory Operation To save a number into two-touch memory keyCaller ID Operation To edit a number in the Callers List and save to Memory To change a number in the Callers List before dialingTo delete an item in the Callers List To delete all items in the Callers List New Call LED IndicatorTrouble Shooting Blocked or Unavailable CallsProblems Check Error appears on the LCD panel Care and Maintenance Limited Warranty
Top Page Image Contents