INSTALLATION
Power Supplies
This unit is designed to operate from an
A. Operating from the AC-DC Adaptor
This unit should always be used with the included
1.Insert the adaptor’s plug into the DC Power Jack at the back of the base.
2.Plug the
3.If the unit is not to be used for an extended period of time, unplug the
Figure 1
B.Installing the Batteries
1.Unscrew and open the battery cover located on the bottom of the base. Please note this construction is for compliance with safety regulations. Install the batteries according to Figure 2.
IMPORTANT: Be sure that the batteries are installed correctly. Wrong polarity may damage the unit.
Figure 2
2.For better performance and longer operating time, we recommend the use of alkaline batteries.
(a)Do not mix old and new batteries.
(b)Do not mix alkaline, standard
3.If the unit is not to be used for an extended period of time, remove all the batteries.
WARNING
To avoid the memory loss from the Caller ID phone while changing batteries,
-Do not disconnect the
-Replace all the old batteries with new ones as soon as possible.
-8-