Pause Button, Hold Button Normal Mode, PBX Mode

PAUSE BUTTON

PAUSE allows you to insert a 3.6-second pause in the dialing sequence. This is particularly useful if you are connected to a PABX system where you must dial an access code (usually the number 9) to obtain an outside line.

1.Press PAUSE and release at any point in the dialing sequence where a pause is desired.

2.PAUSE can be pressed more than once to create a longer pause.

HOLD BUTTON

1.NORMAL MODE

a.Press HOLD and hang up the handset. HOLD will light up and remain lighted until you resume your conversation.

b.To resume your conversation, lift the handset or that of any extension phone on the same line or press and release SPEAKER. The HOLD indicator will go out and your call can continue.

2.PBX MODE

Press HOLD. The phone will dial out the code. may now be necessary to hang up the handset. light in this mode.

FLASH BUTTON

Depending on the PBX, it Note that HOLD will not

This telephone provides a line break signal for accessing PABX service or for use of Call Waiting from your local telephone company. If you have Call Waiting ser- vice, you can use the Call Waiting function per the following instructions.

1.While having a conversation, another party calls and you hear a tone.

2.Press FLASH once and release. The first conversation is placed on hold and the second call can be answered.

3.Press FLASH again and release. You may speak to the first caller again and the second call is placed on hold.

HEADSET BUTTON

The HEADSET button can control the interface to either a corded or wireless headset. See instructions in INSTALLATION section for operation wtih Plantronics™

wireless headsets.

CORDED HEADSET

This telephone will accept either a 2.5 mm cell phone-style headset or an RJ type headset. Press HEADSET to connect and disconnect from calls.