Cortelco 8782 instruction manual Operation Telephone

Page 9

OPERATION

TELEPHONE

1.Make a Call - Pick up the handset or press to get

dial tone and dial the number. When the called party answers, the LCD will time the call automatically.

2.Answer a Call - Pick up the handset or press to answer a call.

3.End a Call - Hang up the handset or press to end a call.

4.Switch Handset to Speakerphone - Press and then hang up the handset to talk through the speakerphone.

5.Switch Speakerphone to Handset – While on a Speakerphone call, pick up the handset and the talk mode will switch automatically.

6.Hold

a.Handset – While off-hook with the handset, press HOLD and the call will be muted. The LCD will say MUTE ON. You can still hear the other party, but the other party cannot hear you. Press HOLD again to return to the call. When the handset is hung up, the call is placed on HOLD and the IN USE/NEW LED flashes. Pick up the handset again to return to the call or press to return to the call in speakerphone mode.

b.Speakerphone – While off-hook with the speakerphone, press HOLD and the call will be placed on HOLD. Press HOLD or to return to the call in speakerphone mode. Pick up the handset again to return to the call in handset mode.

7.Flash - This function is used for transfer on most PBX systems and also for call waiting service from the telephone company.

8.Pre-dialWhile on-hook, dial the phone number and then

pick up the handset or press . The number will be dialed automatically.

9

Image 9
Contents Line Powered Caller ID Speaker Phone Table of Contents Important Safety Instructions Telephone Part Identification Page Desk Mount InstallationFunction Setup Message Waiting SetupPage Operation Telephone Redial Caller IDReview Phone Book Phone BookMaintenance Information Troubleshooting Telephone Service ProblemsTelephone Repair FCC Information Limited Warranty