Cortelco 9225 Desk Mount, Answering Machine, Ringer Volume, Modems and FAX Machines

Page 10

DESK MOUNT

1.Press in the two areas shown below to release the desk stand.

2.Rotate the desk stand into the desk mounting position as shown below.

3.Connect the power adapter and the line cord. See Steps 2 and 3 in the DESK MOUNT instructions.

4.Plug the coiled cord into the handset, and then plug the other end of the cord into the handset jack.

5.Place the handset on the base.

ANSWERING MACHINE

1.Connect the LINE jack of the answering machine to the wall telephone jack.

2.Connect the Tel. Line jack of the 9125 to the PHONE jack of the answering machine.

3.Set the answering machine to answer after 2 or more rings.

RINGER VOLUME

Set the Ringer Volume Switches to your desired loudness. These switches are on the back of the 9225. Ringer volume can be set to Hi, Low or Off for each line. NOTE: If the ringer volume is set to OFF, it is very easy to miss calls.

MODEMS AND FAX MACHINES

These devices may be plugged into the Data jack on the back of the 9225.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents OWNER’S Caller ID Type Table Of Contents Speed Dial Important Safety Instructions Page Telephone Part Identification Back and Side Battery Installation InstallationBOX Contents Dialing ModeAnswering Machine Ringer VolumeDesk Mount Modems and FAX MachinesUnit Setup EnterMenu Basic Operation Feature Buttons Line 1 Button / Line 2 Button Hold ButtonConf Button Call Forward on Volume ButtonRedial Button Call Forward OFFSpeed Dial Store a Caller ID Record to a Memory Button Review the Contents of a Memory ButtonPhone Book Adding AN Entry to the Phone BookDeleting a Phone Book Entry Caller IDDialing from the Phone Book Storing a Caller ID Record in the Phone BookReviewing Calls Private CallsCaller ID on Call Waiting Deleting CallsTroubleshooting Telephone Repair Clude the Original Sales ReceiptFCC Information Limited Warranty
Top Page Image Contents