UNIT SETUP
Use MENU to enter the setup screen.
1.Press MENU. PHONE BOOK appears on the display. The Phone Book is covered in a later section.
2.Press 
. When CALL WAITING appears, press ENTER. Then use 
to toggle this feature ON or OFF. If this is set to OFF, Caller ID information will not be displayed for a Call Waiting call. Press ENTER to exit.
3.Press 
. When DATE FORMAT appears, press ENTER. Then use 
to select either
4.Press 
. When HOUR FORMAT appears, press ENTER. Then use 
to select either 12 hour or 24 hour time display. Press ENTER to exit.
5.Press 
. When SET FLASH appears, press 
to select between 600ms, 300 ms, 120 ms and 100ms. Press ENTER to exit.
6.Press 
. When SET AREA CODE appears, use the keypad to enter the area code in which the phone will be used. This is necessary so that the # key can change dialing formats (7 digits, 10 digits, 11digits).
7.Press 
. When SET LANGUAGE appears, press 
to select between
NOTE: If you have Caller ID service, the time will be automatically set. Use Step 8 only if you do not have Caller ID. If you wish to display the Day of the Week, you will need to set the year since Caller ID does not include this.
8.Press MENU. Then press 
or 
until SET TIME appears. Press ENTER to set the time.
a.The “tens” digit in the hour is flashing. Use 
or 
to set this digit. Then press
ENTER.
b.The “ones” digit in the hour is flashing. Use 
or 
to set this digit. Then press
ENTER.
c.The “tens” digit in the minute is flashing. Use 
or 
to set this digit. Then press
ENTER.
d.The “ones” digit in the minute is flashing. Use 
or 
to set this digit. Then press
ENTER.
e.The “tens” digit in the month is flashing. Use 
or 
to set this digit. Then press
ENTER.
f.The “ones” digit in the month is flashing. Use 
or 
to set this digit. Then press
ENTER.
g.The “tens” digit in the day is flashing. Use 
or 
to set this digit. Then press
ENTER.
h.The “ones” digit in the day is flashing. Use 
or 
to set this digit. Then press
ENTER.
i.The “tens” digit in the year is flashing. Use 
or 
to set this digit. Then press
ENTER.
j.The “ones” digit in the year is flashing. Use 
or 
to set this digit. Then press
ENTER.
k.The cursor for the day of the week will begin flashing. Use 
or 
to toggle this on or off.
l.Press MENU to return to the idle screen.
NOTE: LCD Contrast may also be set using the Contrast button on the LCD screen.
11