Clarity C35 manual Important Safety Instructions

Page 20

IMPORTANT SAFETY INSTRUCTIONS

When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons including the following:

1.Read and understand all instructions.

2.Follow all warnings and instructions marked on the telephone.

3.Do not use this telephone near a bathtub, wash basin, kitchen sink or laundry tub, in a wet basement, near a swimming pool or any where else there is water.

4.Avoid using a telephone (other than a cordless type) during a storm. There may be a remote risk of electrical shock from lightning.

5.Do not use the telephone to report a gas leak in the vicinity of the leak.

6.Unplug this telephone from the wall outlets before cleaning. Do not use liquid cleaners or aerosol cleaners on the telephone. Use a damp cloth for cleaning.

7.Place this telephone on a stable surface. Serious damage and/or injury may result if the telephone falls.

8.Do not cover the slots and open- ings on this telephone. This tele- phone should never be placed near or over a radiator or heat register. This telephone should not be placed in a built-in installation unless proper ventilation is provided.

9.Operate this telephone using the electrical voltage as stated on the base unit or the owner’s manual. If you are not sure of the voltage in your home, consult your dealer or local power company.

10.Install the telephone where no one will step or trip on the cord.

11.Do not overload wall outlets or extension cords as this can increase the risk of fire or electrical shock.

12.Never push any objects through the slots in the telephone. They can touch dangerous voltage points or short out parts that could result in a risk of fire or electrical shock. Never spill liquid of any kind on the telephone.

13.To reduce the risk of electrical shock, do not take this phone apart. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used.

14.Unplug this product from the wall outlet and refer servicing to the manufacturer under the following conditions:

A.When the phone cord or plug is frayed or damaged.

B.If liquid has been spilled into the product.

C.If the telephone has been exposed to rain or water.

D.If the telephone does not

SAVE THESE INSTRUCTIONS

20

Image 20
Contents C35 Table of Contents Introduction Thank you for purchasing the Clarity C35 Amplified TelephoneContents & Parts Checklist Flash Button Hold Button Memory Button Hold Indicator Redial ButtonPhone Number Directory Ringer Volume Switch Pulse/Tone Switch Phone Line Connection HOW to Connect the C35 Phone for Desktop USE Clarity Power Volume Control Clarity Power TechnologyClarity Power Boost Button To install new batteries Getting StartedDesk Mounting Instructions Connecting your TelephoneChoosing a Location Wall Mounting Instructions Getting Started Telephone Operations Dialing a Memory Location FlashLast Number Redial HoldVisual Ringer Ringer VolumeC35 Low Battery Indicator Phone Indicator Lights Troubleshooting No Dial Tone/Phone Will Not Operate Unable To Dial Out Person On The Other End Cannot Hear YouVolume Control Does Not Work Unable To Hear Phone RingerStatic On The Line InterferenceTechnical Specifications Unable to Access Automated SystemsDo I Need to Install Batteries? Still Not Working?Important Safety Instructions Never install telephone wiring during a lightning storm For Base UnitRegulatory Compliance Part 68 of FCC Rules InformationCustomer-Owned Coin/Credit Card Phones Part 15 of FCC Rules InformationParty responsible for regulatory compliance Warranty & Service How to Obtain Warranty Service United StatesCanada Include the following information