Oricom T1000 manual General Information, Safety

Page 11

13GENERAL INFORMATION

14

IMPORTANT

This equipment is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services.

SAFETY

The LCD display is made of glass and may break if the handset is dropped. Place the phone securely on a stable surface.

Only use the power supply that came with the product. Using an unauthorised power supply will invalidate your guarantee and may damage the telephone.

CAUTION

Use only the AC adapter supplied with this telephone. Incorrect adapter polarity or voltage can seriously damage

Battery Usage

IMPORTANT

THERE IS A RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

Never use non-rechargeable batteries; use the recommended rechargeable type supplied with this telephone. Ni-MH batteries must be disposed of in accordance with the applicable waste disposal regulations.

Battery requirements: Each handset requires three rechargeable Ni-MH batteries, size AAA 1.2V 750mAh

Use only the battery type listed in this user guide. Do not use Alkaline or lithium batteries.

Do not dispose of the batteries in a fire, as they can

Sudden release of battery electrolyte can cause burns or irritation to the eyes or skin.

Observe the proper polarity, or direction, of any battery. Reverse insertion of the batteries can result in leakage or explosion.

Remove the batteries if you do not plan to use the product for several months at a time.

Discard any “dead” batteries because they are likely to leak into the product.

Do not store this product or the batteries in a high temperature area.

NOTE

Your Touch Handset will get warm during charging and usage. This is normal. The handset may take a few seconds to power up.

touch

 

the unit.

 

 

explode.

 

 

 

Do not open or mutilate the

batteries. Released

 

 

 

Base:

 

Charger:

electrolyte is corrosive and can cause damage to the eyes

 

 

or skin. It can be toxic if swallowed.

 

Input: 240 VAC 50 Hz

 

Input: 240 VAC 50 Hz

 

 

Avoid contact with metal objects

when handling the

Output: 6 VDC 300 mA

 

Output: 6 VDC 300 mA

batteries. These objects could short out the batteries or

 

cause the conductor to overheat resulting in burns.

 

 

 

Polarity: Centre positive

 

Polarity: Centre positive

Do not attempt to recharge the batteries by heating them.

 

 

 

 

Cleaning your Oricom Touch Phone

Wipe the handset, base and charger with a soft anti-static cloth (supplied). Never use a dry cloth as this may cause a static shock. Never use household polish as this will damage your product.

Image 11
Contents User Guide Pack Contents Environment and Safety Make sure your base is Quick SET UP Using Your Touch Phone and BaseYour Handset Display ContentsPhonebook Using Your PhoneTo return to standby mode at any time, press Touch Activated KeypadTo select SET Contrast Menus and SettingsRing Setting and press Delete Record and pressTo select External Call or Phone Setup and pressSET Time and press Clock SettingsSecurity SET and press MULTI-HANDSET USETo Delete Record or Delete ALL and pressTroubleshooting Simple SolutionsGeneral Information SafetyWarranty Customer Support Touch