Using Your Phone, Touch Activated Keypad, Phonebook

1USING YOUR PHONE

Touch Activated Keypad

Unlike other phones your Touch phone has a ‘touch activated keypad’. The touch activated keypad will automatically disable when you hold the handset receiver to your ear. The idea being, to reduce the risk of accidental keypad presses while the phone is held against the side of your face. Likewise, the keypad also disables automatically 5 seconds after the last key press. To ‘wake’ the keypad to enable you to dial further digits, e.g. if you want to access the menu, you should touch any of the number keys, wait for the backlight to come on and then you can dial normally. It is very easy to tell when the keypad is disabled, as the keypad backlight will not be on. Additionally if you want to manually disable the keypad when carrying the handset to prevent accidental key

operations, just press followed by the key. The manual keylock feature cannot be activated during a call. A

To return to standby mode at any time, press

Make a call

Press , wait for the dial tone and dial the number.

Preparatory dialling

Enter the number first, then press to dial or to cancel.

Press to delete digits.

Switch to handsfree/speakerphone during a call

Press . SPKR will be displayed. Press again to go back to the handset.

Adjust the call volume

During a call, press or to increase/decrease the volume.

If auto-answer is on and the handset is in the base:

Lift the handset to answer the call. You do not need to

press .

Redial a number

Press , then . Or

Press , then press or to scroll to any of

the last 20 dialled numbers and press to dial.

Mute ON/OFF

Mute your voice so the caller cannot hear you. During a call:

Press to switch mute ON/OFF. MUTE will be shown on the display.

Call waiting

To use Call Waiting you must subscribe to the relevant service from your network provider.

call on hold and talk with the second caller.

2To toggle between calls press listen to dial tone then

press .

Caller information of this second call will be stored in the call log.

If you have subscribed to your telephone network operators Call Waiting Caller ID service (Australia only), your phone will display the number of the second incoming call for around 60 seconds while you are talking on the phone.

Page a handset

Press on the base. Handset(s) will ring.

To stop the paging ring, press again or press any key on the handset.

Phonebook

touch
key icon will appear in the top left of the display to show		End a call
the keys are locked, pressing	followed by the will	Press	or place the handset on the base/charger.
unlock the keys again for use.
		Receive a call
		When the phone rings, lift the handset from the
		base/charger and press		.

During a call, you will hear two loud beeps periodically to notify you of another incoming call. If you wish to answer this call:

1 When the handset receives a second call, the number of the caller appears on the display. It will display for 60 seconds or until you press a key on the phone. Press

listen for dial tone then Press to put the current

Store up to 60 phonebook entries. Names up to 16 characters, numbers up to 24 digits.

Store a phonebook entry

1 Press then twice.

2 Enter a name using the keypad and press .

3 Enter a number using the keypad and press to confirm.