Operation
The Repeater Access function can be set (from channel 1 to 8) used by local repeater stations. When activated, your radio will receive the Repeater on its specific channel (all repeater outputs are on channel 1 to 8) but transmits to the repeater channel 31 through 38.
e.g.
CH01 on Duplex mode will receive on CH01 but transmit on CH31 CH02 on Duplex mode will receive on CH01 but transmit on CH32.
CH and Number | Simplex mode Transmit/ | Duplex Mode transmit | |
reciever Frequency (MHz) | Frequency(MHz) | ||
| |||
|
|
| |
1 | 476.425 | 477.175 CH31 | |
|
|
| |
2 | 476.450 | 477.200 CH32 | |
|
|
| |
3 | 476.475 | 477.225 CH33 | |
|
|
| |
4 | 476.500 | 477.250 CH34 | |
|
|
| |
5 | 476.525 | 477.275 CH35 | |
|
|
| |
6 | 476.550 | 477.300 CH36 | |
|
|
| |
7 | 476.575 | 477.325 CH37 | |
|
|
| |
8 | 476.600 | 477.350 CH38 | |
|
|
|
To Turn Duplex (DPX) ON
1.Press and hold the DPX button for 2 seconds, DPX will appear on the LCD display.
To Turn Duplex (DPX) OFF
1.Press and hold the DPX button for 2 seconds, the DPX will disappear from the LCD display.
NOTE: For an up to date list of repeaters you can visit: http://www.acma.gov.au
14