Oricom UHF050 manual Priority Scan, LCD Display Controls, Rx channels

Operation

Priority Scan

In a priority scan the selected priority channel is checked for every 5 memory channels.

To Start a Priority Scan

1.Press the P SC button for 2 seconds, the priority scan will start, P-SCwill be displayed on the LCD.

To Stop a Priority Scan

1.Press the P SC button for 2 seconds, the Priority Scan will stop, P-SCwill disappear from the LCD display.

LCD Display Controls

Display Backlight

You can select from two colour options for the LCD backlight. The two options are Orange and Green.

To select the backlight colour (BLT)

1. Press the BLT button, the display will toggle between Orange and Green.

Display Brightness

You can reduce the brightness of the LCD backlight to be more comfortable while driving at night.

To Dim the display

1.Press and hold the DIM button for 2 seconds, the display will toggle between normal and DIM brightness levels.

60 Rx channels

The UHF050 has 60 receive only channels which can be programmed from 450MHz to 512MHz in steps of 12.5KHz.

17