
Operation
To switch to the primary Channel
1. Press the INS button on the Microphone.
BEEP Tone (BPT)
The Beep Tone emits a tone when you press any of the buttons on the Microphone (except the PTT switch)
To Turn ON the BEEP Tone
1.Press and hold the BPT button for 2 seconds, BPT appears on the LCD display.
To Turn OFF the BEEP Tone
1.Press and hold the BPT button for 2 seconds, the BPT disappears from the LCD display.
Memory Scan
Initially All 40 channels are stored in memory, indicated by MEM next to the channel on the LCD display. During a memory scan all channels in memory are scanned for a signal.
To Remove or Add a channel to the memory
1.Select the channel you wish to add or remove from memory.
2.Press the MEM key to add or remove from memory, MEM will be displayed on the LCD if the channel is in memory.
To start a Memory Scan
1.Press the M SC button, the scan will start,
To stop a Memory Scan
1.Press the M SC button, the scan will stop,
16