Oricom TP170WP manual Caller ID, Receiving a Call Can be stored up to 64 calls

Page 18

9. Caller ID

Important: To use Caller ID functions the CLIP symbol must be on. If the CLIP symbol is not visible on the display, press the CID button once.

9.1 Receiving a Call (Can be stored up to 64 calls)

•If an incorrect, invalid or incomplete Caller ID signal is received, the display shows -ERROR-.

•If only the caller's phone number is received, the display shows the caller's phone number with the time and date it was received. The NEW symbol turns on and NEW CALL LED blinks.

Notes:

1.CALL#01 means this data is stored in Caller ID memory location #01.

2.The calling time and date are immediately recorded from the real-time clock.

•If the callers number is not available due to the caller’s restriction, the display shows -PRIVATE CALL- with the time and date received. The NEW symbol turns on and NEW CALL LED blinks.

•If the callers number is not available, the display will show -OUT OF AREA- with the call’s time and date.The NEW symbol turns on and NEW CALL LED blinks.

•If a overseas call is received, the display will show -LONG DISTANCE- with the calls time and date. The NEW symbol turns on and NEW CALL LED blinks.

Notes:

1.If the Caller ID memory is full, the oldest data will be removed on a first- in/first-out basis.

2.If the Caller ID information received duplicates another call in memory, the time/date will be updated and the “REPEAT” symbol will be lit.

3.If no key is pressed within 20 seconds, the display will display the total call counter, new call counter, current time and date.

9.2 View the Caller ID Memory

Press to review more recent calls. The CALL# will increase.

After you view the most recent data in memory, the display will show END OF LIST.

Press to review older calls. The CALL# will decrease.

After you view the oldest data in memory, the display will show END OF LIST.

If the data in memory is being reviewed for the first time, the NEW symbol will be lit. The NEW CALL LED will off if you review the data.

If no key is pressed within 20 seconds, the display will display the total call

counter, new call counter, current time and date. 18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Page General Information REN RN for New Zealand Caller IDLocation of controls N13134Connecting the mains power supply InstallationInstalling batteries supplied in the phone Connecting the telephoneWall Mounting Setting the Time and Date Setting UpSetting the contrast Voice PromptsRinger Volume Control Receiver Volume ControlReceiver Tone Volume Control Hearing Aid CompatibilityTelephone Operation Pairing new pendants to the phoneRemote Pendant setting Making a callLast number Redial Speaker Volume ControlReceiving a Call Pre Dialing a CallPause Network Message Waiting IndicatorCall waiting Recall button Storing numbers in the M1 & M2 one touch memoriesPhone Book Storing numbers in the phone bookOverview To review the Phone Book Memory To dial a number from the Phone BookTo Edit Phone Book Memories To Delete the Phone Book MemoryTo record your emergency message Emergency Call featureEmergency Message To check your emergency messageTo activate the Emergency Call function Caller ID Receiving a Call Can be stored up to 64 callsView the Caller ID Memory Deleting Numbers from the Caller ID Memory Call Back Redial from the Caller ID MemoryCopy from the Caller ID to the Phone Book 10.1Periodic testing 10.2Battery Backup on the phone baseImportant Information 10.5Warranty Information Consumer Support and TroubleshootingCleaning and care WarrantyAustralia Page 2LMC70YY
Top Page Image Contents