Oricom TP170WP manual Deleting Numbers from the Caller ID Memory

Page 19

9.3 Deleting Numbers from the Caller ID Memory

1.Select the required Caller ID memory location by using the or button.

2.To delete single memory, press DELETE button once. The display will show the DELETE?. Press DELETE button for 2 seconds. The data for that call will be erased, and the CALL# and Caller ID information will be updated.

To delete all entire memory, press and hold DELETE button until the display shows DELETE ALL?. Press DELETE for 2 seconds until NO CALLS appears on the display.

Both the total call and new call counters will reset to zero, and the current time and date will be displayed.

9.4 CALL BACK (Redial) from the Caller ID Memory

With the handset on the base. Select the required Caller ID memory location by pressing or . Press CALL BACK button, the speakerphone will automatically dial the selected number.

Or

Pick up the handset, select the required Caller ID memory location by pressing or , then press CALL BACK button.

9.5 Copy from the Caller ID to the Phone Book

You can copy Caller ID information to the phone book while you are reviewing the Caller ID information.

1.Select the required Caller ID memory location by pressing or .

2.Press and hold MENU button for two seconds, display will show COPY TO MEMORY ?.

3.Press OK button again, display will show SAVED!.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Page General Information Caller ID REN RN for New ZealandN13134 Location of controlsConnecting the telephone InstallationInstalling batteries supplied in the phone Connecting the mains power supplyWall Mounting Voice Prompts Setting UpSetting the contrast Setting the Time and DateHearing Aid Compatibility Receiver Volume ControlReceiver Tone Volume Control Ringer Volume ControlMaking a call Pairing new pendants to the phoneRemote Pendant setting Telephone OperationPre Dialing a Call Speaker Volume ControlReceiving a Call Last number RedialStoring numbers in the M1 & M2 one touch memories Network Message Waiting IndicatorCall waiting Recall button PauseStoring numbers in the phone book Phone BookOverview To dial a number from the Phone Book To review the Phone Book MemoryTo Delete the Phone Book Memory To Edit Phone Book MemoriesTo check your emergency message Emergency Call featureEmergency Message To record your emergency messageTo activate the Emergency Call function Receiving a Call Can be stored up to 64 calls Caller IDView the Caller ID Memory Call Back Redial from the Caller ID Memory Deleting Numbers from the Caller ID MemoryCopy from the Caller ID to the Phone Book 10.2Battery Backup on the phone base 10.1Periodic testingImportant Information Warranty Consumer Support and TroubleshootingCleaning and care 10.5Warranty InformationAustralia Page 2LMC70YY
Top Page Image Contents