Oricom TP68 manual Signal Button, Recall Button, Recall button on a PBX

Page 25

- R Signal Button -

6 The Recall Button

You can use the Recall button on your telephone on a PBX and when using your network operators services such as call waiting etc.

6.1Recall button on a PBX

If you have connected your telephone to a PBX, you can use all the facilities such as call transfer, automatic recall, etc. The RECALL button provides access to these facilities. The recall time is selectable, (100ms or 600ms).

6.2Recall button for network services

Your telephone supports your network operators services (eg. call waiting, three-way conference, etc.).

Setting the Recall time

A. Please follow the instructions:

 

Display shows:

 

 

 

Press the MENU button once.

 

Add Entry

 

 

 

Turn the Jog dial until the “Settings” message appears in

 

Settings

the display

 

 

 

 

 

Confirm with YES.

 

Clock

 

 

 

Turn the Jog dial until the “Flash time” message appears

 

Flash time

in the display.

 

 

 

 

 

Confirm with YES.

 

Current flash time

 

 

 

Use the Jog dial to set the required flash time. 100ms for

 

100 - 300- 600 ms

Australia, 600ms for New Zealand

 

 

 

 

 

Confirm with YES.

 

Flash time

 

 

 

Press the NO button twice to exit programming

 

 

6.3Storing Telephone numbers on a PBX

The pause function between the code for the outside line (usually 0 or 9) and the dialling tone described in this chapter is only necessary on older private exchanges.

With some private exchanges, there is a short pause between the code for the outside line (usually 0 or 9) and the dialling tone. This pause can be entered when dialling manually and when dialling from the phone book so that the following numbers are not dialled too quickly.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Speakerphone with SIM Card Reader TP68 User guide General Information User controls Recall Button General Information General InformationQuick connection information REN RN for New Zealand Customers Using Another Company’s Toll ServiceCaller ID Right side User controlsUnderside Setting up Setting upGeneral Information Check contents of pack Connecting the handsetConnecting the telephone cable Connect Mains Power SupplyFitting the desk support Wall mountingSetting the Time / Date Recall setupModem Connection Please follow the instructions Display shows Entering your local area codeAccess Number for International Numbers Please follow the instructions Outside Line Code on a PBX business users onlyOperation OperationReceiving Calls Dialling from the Phone BookSelecting different telephone network providers Muting Adjustable Ringer VolumeAutomatic Redial RedialStoring numbers in the Phone Book Changing stored telephone numbers or names Use of your mobile phones SIM card Operation Add entry Caller Number Display CID Caller Display CIDViewing the Caller List Please follow the instructions Display shows Deleting individual numbers from the caller list Saving a number from the Caller List to the Phone BookDeleting the entire caller list Recall button for network services Signal ButtonRecall Button Recall button on a PBXAdjusting Display Contrast Other SettingsSet Clock Display Format Please follow the instructions Cleaning and care TroubleshootingTemperature and ambient conditions Important informationAustralia ABN 46 086 116 WarrantyCustomer support New Zealand
Top Page Image Contents