Shortcut to turn handset ringer on/off
You can use this shortcut to turn on/off the handset ringer when the phone is
in standby. Simply press and hold 
. 
appears whenever the handset ringer is turned off.
Message waiting indication
You have to subscribe to a voice message service (eg Telstra Message Bank) from your local service provider to use this feature. When you receive a voice message, 
will appear on the display. When you retrieve your messages the message 
will turn off. You can also turn it off by pressing
for 2 seconds during standby.
Paging the handsets
You can page or locate the handsets by pressing the 
on the base. All handsets registered to the base will produce the paging tone for 30 seconds and the screen displays blinking “####”.
You could stop the paging by pressing any key on each handset or pressing
the 
on the base again.
Out of range warning
When you are talking on the phone and you take the handset too far away from the base, you’ll hear an alert tone through the speaker. You should bring the handset back in range with the base. Failing to do so will result in the call being disconnected.
When the handset is too far away from the base during standby, you will see 
flashing.
BENEFITS OF MULTI-HANDSETS
You can use these useful features if you have 2 or more handsets registered to the base.
Answering an internal call
When you receive an intercom call, your handset will ring with 
blinking. You can see the number on the screen of the handset that is calling.
If you press 
when the phone is ringing, the handset ringer will turn off for this incoming internal call.
Press 
to answer.
19