Oricom P80 manual Predialing, Dialing from a phonebook record, Redialing the last dialed number

Predialing

Pre-dial allows you to enter a telephone number and verify it on the screen before you place the call. The screen displays the last 12 digits dialed but you can enter up to 20 digits.

1.Enter the phone number.

2.To enter a pause, press and hold # . A pause is displayed as “P”.

3.When you enter more than 12 digits, turns on. If you attempt to enter more than 20 digits, you’ll hear a reject tone.

4.If you make a mistake, press DEL to erase one digit at a time. Or you

can press to clear the entire number and return the phone to standby.

5.Press to dial out the number.

Dialing from a phonebook record

1.Press . during standby. in the display turns on.

2.Press to search for the record that you would like to dial. Or you can use the number keys to jump directly to the record starting with the corresponding letters of that key.

3.Press OK repeatedly will show the name and number of the record accordingly.

4.Press to dial out the number.

Redialing the last dialed number

1.Press . The last number dialed is displayed.

2. turns on when the number contains more than 12 digits. Press OK to view the off-page digits.

3.Press to dial out the number.

During an external call

Call timer

01-10

The call timer will be displayed a short while after your call is connected. It shows the duration of the call. This timer is shown in minutes and seconds (MM-SS) in the first hour. After that, it will be shown in hours and minutes (HH-MM) with the “-“ blinking to indicate the seconds.

10