BASIC OPERATION
During standby
ORICOM 1
When the phone is in standby, the LCD displays the handset label. The handset number related to the connected base will also be displayed right justified. The battery icon reflects the current battery level and the signal icon indicates the handset is linked to the base.
Answering an incoming external call
JOHN
When there is an incoming call, the phone rings and | flashes. If a CID |
record is received, the caller information is displayed. |
|
turns on if the phone number contains more than 12 digits. In this case, only the last 12 digits are displayed.
If you press 
when the phone is ringing, the handset ringer will be turned off for this incoming call.
1.Press 
to answer the call. 
turns on.
2.Call timer is displayed 10 seconds after the call is connected
3.Press 
or place the handset on the base cradle to disconnect.
Making an external call
Your phone allows you to dial out a phone number in various ways.
Normal dialing
1.Press 
and wait for the dial tone.
2.Use the number pad to dial the phone number. The display shows the digits as you enter them.
3.When you enter more than 12 digits, 
turns on. In this case, you only see the last 12 digits on the screen.
9