3.When you enter more than 14 digits, 
turns on. If you attempt to enter more than 20 digits, you’ll hear a reject tone.
4.If you make a mistake, press 
to erase one digit at a time. Or you can press and hold 
for 2 seconds to clear the entire number and return the phone to standby.
5.Press 
to seize phone line and dial out the number, the 
icon turns on.
Redialling
The last number dialled out will be stored as the redial number.
1.Press 
and wait for the dial tone. the 
icon turns on.
2.Press 
. The last number dialled, if any, is displayed and dialled out.
A redial number can be reviewed before you dial it out.
1.Press 
. The last number dialled, if any, is displayed.
2.Press 
to seize phone line and dial out the number 
turns on.
Phonebook dialling
You need to create a phonebook record before using this feature. Refer to the section of Setting up phonebook records.
1.Press 
the 
turns on.
2.Press 0 to 9 to view the stored phone number. If no phone number is stored in a particular location, a blank screen is displayed instead. If 
turns on, the number contains more than 14 digits.
Press 
to see the rest of the digits.
3.Press 
to seize phone line and dial out the displayed phonebook record, the 
icon turns on.
During a Call
Call Timer
01-15
The call timer will be displayed a short while after your call is connected. It shows the duration of the call. This timer is shown in minutes and seconds
When you end a call, the timer will be displayed for 5 more seconds before the screen returns to standby mode
9 of 16
Adjust the volume
Press 
to adjust the receiver volume to High, Medium or Low.
Mute the call
When on a call you can talk to someone in the same room without your caller hearing you.
1.Press 
the 
icon turns on. The caller will now not hear you but you will still be able to hear the caller.
2.Press 
again to turn off the mute feature.
Receive a second call
If you have subscribed to your telephone network operators service CID on Call Waiting, the telephone will show the phone number of another incoming call while you are talking on the phone.
1. Press |
| listen for dial tone then press | 2 | to put the current call on |
hold and talk with the second caller.
2. Subsequent presses of |
| and | 2 | will toggle you between the 2 |
callers. In any case, the display will show the phone number of the first caller.
Refer to information provided by your telephone network operator.
Caller ID
You will need to subscribe to the CID service provided by your telephone network operator in order to use this feature.
Your phone stores the last 20 received CID records. Each record holds up to 20 digits.
Reviewing CID records
Turns on when a new CID number is received.
1.Press 
when the phone is in standby. The most recent CID record is displayed. You’ll see a blank screen if there is no CID record.
2.If the 
icon turns on, the number contains more than 14 digits.
Press 
to see the rest of the digits.
3.Press 
to see older entries and 
to see newer entries.
4.Press 
again or press 
to return the phone to standby. The 
icon turns off.
10 of 16