When you see “PP” all across the display for a CID record, the call is from a private call or payphone. Similarly, an
Deleting CID records
The CID records can be deleted one at a time.
1.Press 
when the phone is in standby.
2.Press 
and 
to scroll through the records.
3.When you see the CID record you want to delete, press and hold 
until you hear the confirmation tone. The record is successfully deleted. The phone will then show the next record.
4.Repeat steps 2 and 3 to delete other CID records.
5.Press 
again or press 
to return the phone to standby.
CID call-back
You can return a call directly from CID record provided that it contains a valid phone number.
1.Press 
. the 
icon turns on.
2.Press 
and 
to scroll to the CID record that you want to dial.
3.Press 
to seize phone line and dial out the displayed CID record, 
turns on.
Saving a CID record to phonebook
Refer to the section of Setting up phonebook records.
Phonebook
There are 10 phonebook locations ( 0 to 9 ) where you can store phone numbers for quick dialling later.
Setting up phonebook records
1.When the phone is in standby, enter the phone number you want to store. When you enter more than 14 digits, 
turns on. If you attempt to enter more than 20 digits, you’ll hear a reject tone.
2.When number is displayed, press and hold 
until the 
icon turns on.
3.Press 0 … 9 to store the number. You’ll hear the confirmation tone
when the number is successfully stored the
icon will then turn off. You should be aware that any number that was previously stored in that location will be overwritten by this new number.
Besides entering the number by normal dialling, you can also retrieve the redial number or a CID record to save it as a phonebook record.
11 of 16
Deleting phonebook records
The phonebook records can be deleted one at a time.
1.Press 
when the phone is in standby the
icon turns on.
2.Press 0 … 9 to choose the phonebook record that you want to delete.
3.Press and hold 
until you hear the confirmation tone. The phonebook record has been successfully deleted and a blank screen is displayed.
4.Repeat steps 2 and 3 to delete other phonebook records.
5.Press 
again to return the phone to standby.
Deleting Redial Number
1.Press 
to retrieve the redial number, if any.
2.Press and hold 
until you hear the confirmation tone. The redial number has been successfully deleted and the phone returns to standby.
PROGRAMMING
When the phone is in standby mode press 
to enter the programming mode. Three icons turn on to indicate the programming items.
At any time you would like to cancel and exit programming, press 
to return the phone to standby. All the changes made will be ignored.
Handset Ringer Melody and Ringer Volume
1.Press 1 once you have entered into programming mode.
2.Only the
icon turns on. The phone plays the current ringer melody at the current volume level.
3.Press 1 … 5 to choose the melody. The melody will be played once.
4.Press 
repeatedly to adjust the ringer volume. The 
icon turns on if the volume is set to OFF.
5.Press 
to confirm and return the phone to standby.
12 of 16