Caller ID Operation
If you subscribe to your telephone operators service (charges may apply), numbers of the incoming calls will be displayed on the screen and stored in the call log (please consult your telephone service provider for details).
The eco50 series can store the last 20 calls including: the record number, date/time, and phone number (up to 24 digits for the cordless handset).
When you have new/unanswered calls, 
flashes on the cordless handset. If a call has been answered, then the call is set to old call.
Call waiting (Australia only)
You can use the recall function to answer a second call while you are on the phone. However this service needs to be turned on. For example, to turn on Telstra’s Call Waiting service:
1. Press [ ] on the cordless handset to wait for dial tone then press [
] [4] [3] [#].
2.You will hear a service tone then press [ 
] again.
Take two different calls at the same time
1.Press [ R/
] key. You will hear a dial tone.
2.Press [ 2 ] to put the current call on hold and talk with the second caller.
3.Repeat steps
Review Caller ID records
During standby mode,
1.Press [ 
\
] key to display the latest call. The following will appear on the display.
45748888
If the list is empty, “NO” is shown on the display.
2.Press [ 
] key to view the data and time of the CID.
3.Press [ 
\
] key to view to the previous call. Press [ R/
] key to view the next call.
Only when the network sends the time/date together with the telephone number! On some networks with caller ID, time and date will not be displayed.
During a call, you will hear two loud beeps periodically to notify you of another incoming call. If you wish to answer this call,