Oricom eco50 manual Multi-handset Operation, Cordless handset keypad lock, Conference calls

Page 16

14Cordless Handset Operation

Multi-handset Operation

Your eco50 series phone can have up to 5 handsets registered to the base unit. Each handset has its own number HS-1, HS-2, HS-3, HS-4 and HS-5, shown on the left-hand side of the display. With 2 or more handsets you can:

•Make intercom calls while on an external call

•Switch between an external call and intercom call

•Transfer an external call from one handset to another

•Set a 3-way conference call between yourself, an external call and intercom call

Note:

•A maximum of 1x external call and 2x intercom calls can take place at the same time.

•If you make an external call + another handset is on line

=result in a busy tone.

•You can make an intercom call when the other handset is in progress.

Call transfer between cordless handsets

During external call,

1. Press [ INT ] key. The following will appear on the display.

2.Key the handset number (1, 2, 3, or 4) you wish to transfer.

3. Press [ ] key to exit Intercom mode and return to standby mode.

Conference calls

This function allows 3 parties (yourself + external call + intercom call ) to be connected at the same time.

During external call,

1.Press [ INT ] key. The following will appear on the display.

2.Key the handset number (1, 2, 3, or 4) you wish to invite to the conference.

3.Then you can have an intercom call with HS-x.

4.At this moment, you can press and hold [INT] key for 3 seconds to go to 3-way conference call.

Cordless handset keypad lock

During standby mode,

1.Press and hold [ ] key to lock the keypad.

2.To release keypad lock, press and hold [ ] key for 3 seconds.

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Oricom eco50 Series Table of Contents Page Getting Started TipPack contents Purchasing additional handsets Getting Started Your cordless handsetGetting Started  Understanding the cordless handset displayBasic Operation During standbyAnswering an incoming call Making an external callMute feature Checking the signal strengthBasic Operation  Handset rangeHandsfree mode Volume adjustment Basic Operation Recall selectionCaller ID Operation Call waiting Australia onlyReview Caller ID records Take two different calls at the same timeDelete CID records Store a CID numberCalling a number from the CID records LNR Function Last Number Redial Redial the last numberDelete last number dialled Store the last number dialledAdd new records PhonebookReview / Edit / Dial stored Phonebook records Handset ringer adjustment Voicemail indication network serviceCordless Handset Operation Multi-handset Operation Cordless handset keypad lockCall transfer between cordless handsets Conference callsRegister new handsets on the eco50 base RegistrationRemove handsets Troubleshooting AppendixTry a different connection point, one that is away from Appendix Product Specifications Warranty Warranty Information AustraliaExclusion and limitation of liability Customer Support Australia New Zealand
Top Page Image Contents