Basic Operation
During standby
Note:
If the power is not connected to the base unit.
The cordless handset CANNOT operate.
Cordless handset's LCD display
HANDSET 1 : Handset number
: Current battery level
:A constant signal icon indicates the cordless handset is linked to the base unit. When signal icon is flashing the handset needs to be
Note:
The signal icon will also flash if the handset is out of range.
Answering an incoming call
When there is an incoming call, the phone rings and 
flashes on the display. If a CID record is received, 
flashes and the caller information is displayed.
1.Press [ 
] key to answer the call.
2.Press [ 
] key again to end the call.
Making an external call
Normal dialling
1.Press [ 
] key.
2.Enter a telephone number. If you enter more than 12 digits, you only see the last 12 digits on the display.
3.Press [ 
] key to end the call.
Pre-dialling
1.Enter a telephone number.
2.When necessary, press [ 
] to erase the digit individually.
3.Press [ 
] key to dial.
4.Press [ 
] key to end the call.