HANDSET Controls
1.REDIAL/PAUSE Button: (REDIAL) Press to REDIAL the last number you called. (PAUSE) Press to insert a PAUSE while dialing. (You will need the PAUSE button to dial numbers which use an alternative Long Distance Access Code.)
2.VOL (VOLUME) Button: During a call, press the (+) button to increase the receiver volume level from LOW, MEDIUM, HIGH, or MAXIMUM. Press the
3.CH (CHANNEL) Button: Press to change the operating channel when you hear interference.
4.MEMO Button: Press to store phone numbers in memory or to call a number you have previously stored.
5.HEADSET JACK: For connecting your headset plug to enjoy
6.TEMPORARY TONE (*) Button: Press to temporarily change the dialing mode from PULSE to TONE for Rotary Service Users. (Press once before entering numbers to access the Answering System or electronic banking services, etc.)
7.MICROPHONE
8.ANTENNA
9.IN USE/LOW BATT LED Indicator: (IN USE) Lights up when the HANDSET is in TALK mode. (LOW BATT) Blinks when the battery charge is low (See page 14 for detail.)
10.MUTE Button: Press to mute the HANDSET microphone while having a phone conversation.
11.FLASH Button: Press to answer an incoming call if you have Call Waiting.
12.TALK Button: Press to answer an incoming call or to place a call. Press to end a call.
13.RINGER ON/OFF Switch: Set switch to ON to activate the ringer on the HANDSET. Set switch to OFF to deactivate the HANDSET ringer.
14.CHARGE CONTACTS: For charging the BATTERY PACK inside the HANDSET. We recommend cleaning the CHARGE CONTACTS periodically with a damp cloth.
5