Recalling Stored Numbers from Memory

Cordless Telephone Operation

EXAMPLE : To store the number 115-1968 under the TELEPHONE KEYPAD 1 button:

1	- Press the		MEMO button.	4 -	Press the TELEPHONE KEYPAD 1 button.
2	-	Dial 115-1968.		5 -	You have stored 115-1968 under
					TELEPHONE KEYPAD 1 button.
3	-	Press the	MEMO button again.

A total of 10 telephone numbers can be programmed in memory.

IMPORTANT: The maximum number of digits that can be stored for any phone number is 16 in PULSE or TONE mode. The maximum number of digits for mixed (TONE and PULSE in combination) dialing is 15. If you are using a switchboard system to access an outside line (such as an 8 or 9), press the PAUSE button to store a PAUSE.

1.Press the TALK button.

2.Press the MEMO button.

3.Press the TELEPHONE KEYPAD button for the number you have stored. The stored number will be dialed automatically.

EXAMPLE: To recall number 115-1968 stored under the TELEPHONE KEYPAD 1 button:

1 -	Press the	TALK button.	3 - Press the TELEPHONE KEYPAD 1 button.
2 -	Press the	MEMO button.

Redial Feature

1.If you get a busy tone, press the TALK button to hang up.

2.Later, press the TALK button again.

3.Listen for a dial tone.

4 . Press the REDIAL button. This will automatically redial the last telephone number you called.

Mixed Mode (Temporary Tone) Dialing

If you only have Pulse (rotary dialing) service in your area set the TONE/PULSE select switch at the left side of the BASE UNIT to PULSE position. If you want to access tone dialing mode, press the Temporary Tone (*) button on the HANDSET and dial the desired number, subsequent digits will be dialed into Tone mode. Pulse mode will reset after the HANDSET is returned on-hook.