Using the Intercom, Chain-Dialing | Radio Shack ET-007 guide

43-007.fm Page 19 Wednesday, March 22, 2000 11:24 AM

Chain-Dialing

For quick recall of numbers for special services (such as bank-by-phone or al- ternate long-distance), you can store each group of numbers in its own mem- ory location. Then, when calling special services, dial the service's main number first. At the appropriate place in the call, press the memory location button for the additional numbers you want to send.

Testing Stored Emergency Numbers

If you store an emergency service's number (police department, fire depart- ment, ambulance) and you want to test the stored number, make the test call during the late evening or early morning hours to avoid peak demand periods. Remain on the line to explain the reason for your call.

USING THE INTERCOM

The intercom feature lets you send a page from the base handset to the headset, so that you can talk to some- one at the headset or locate it if you mis- placed it.

From the Base

1.Press INTERCOM on the base. The headset sounds five series of con- tinuous beeps until someone picks up the phone.

2.Put on the headset, pull down the microphone, and press OFF then INTERCOM on the remote dial card. The corded base phone rings and the INTERCOM indicator on the base flashes.

Note: You must pull down the micro- phone on the headset to use the remote dial card.

3.To answer the call, pick up the hand- set or press INTERCOM on the dial card again. Otherwise, the corded base phone rings five times, then stops.

If the handset is off the hook, press INTERCOM on base. The headset rings. Press INTERCOM on the remote dial card to talk. Or, press INTERCOM on the base to stop the ringing.

From the Headset

Press INTERCOM on the infrared remote dial card. The corded base phone rings. Pick up the handset to answer the call. The INTERCOM indicator on the base lights.

Or, press INTERCOM on the remote dial card to stop the ringing. Otherwise, the corded phone rings five times and then stops.