4.Route the adapter's cord through the strain relief slot on the bottom of the phone.
5.Lift the base telephone's antenna to a vertical position.
CONNECTING THE HEADSET CHARGER, WIRELESS HEADSET AND INFRARED REMOTE DIAL CARD
Wireless
Headset
Headset
Charger
To connect the headset charger, con- nect the headset charger’s
Follow these steps to connect the wire- less headset:
1.Slide open the battery compartment cover on the left side of the headset.
2.Install the supplied rechargeable
pack in the headset’s battery com- partment with the battery contact points down.
Battery
Pack
Important: You must install the bat- tery pack and fully charge it before you can use the headset (see “Charging the Battery Pack” on Page 10).
3.Replace the cover.
4.Place the headset on the headset charger. The charging indicator on the headset lights red, then flashes slowly when the battery pack is fully charged.
Notes:
•The charging indicator lights when the headset is on the head- set charger, even if there is no battery pack in the headset. Be sure the battery pack is inserted before charging.
7