Radio Shack TAD-1018 owner manual Remote ANSWER-ON

Page 18

REMOTE ANSWER-ON

You can use any remote phone to set the answering system to answer calls if:

•The answering system has power,

•The cassette is loaded, and

•The answering system is off.

To set the answering system to an- swer calls, dial your phone number and wait about 60 seconds until the answering system answers. Then hang up the phone.

Note: Be sure to turn on the system when you get home, to play back any recorded messages.

Image 18

Contents TAD-1018 Features Answering SystemTelephone Read this First FCC StatementContents Installation Selecting a LocationLoading Cassette Connecting Power Recording the Outgoing MessageChecking the Outgoing Message Placing the Phone on a Desk TOP Mounting the Phone on the WallPage Setting the Dialing Mode Setting the Number of RingsTurning OFF/ON the Ringer Page Using Flash Using PauseUsing Redial Telephone OperationSetting the PHONE’S Volume Using Tone Services with a Pulse LineSetting the Answering SYSTEM’S Volume Setting the Answering System to Answer CallsSetting Recording Time Answering System OperationScreening Calls Playing MessagesPage Remote Control Operation Remote PlaybackErasing Messages Remote ANSWER-ON Troubleshooting Problem Cause SolutionProblem Cause Solution Care and Maintenance FCC Wants YOU to Know LightningPage RadioShack Division of Tandy Corporation Fort Worth, Texas