Radio Shack TAD-1018 owner manual Read this First, FCC Statement

Page 3

We recommend you record your sys- tem’s serial number here. The number is on the bottom of the answering sys- tem.

Serial Number:

This system has been tested and found to comply with all applicable UL and FCC standards.

WARNING: To reduce the risk of fire or shock hazard, do not ex- pose this product to rain or mois- ture.

 

CAUTION

!

 

 

 

RISK OF ELECTRIC SHOCK.

 

 

 

DO NOT OPEN.

 

 

 

 

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-SERVICE- ABLE PARTS INSIDE. REFER SERVIC- ING TO QUALIFIED PERSONNEL.

This symbol is intended to alert you to the presence of uninsulated dan- gerous voltage within the product’s enclosure that might be of sufficient magnitude to constitute a risk of electric shock. Do not open the product’s case.

This symbol is intended to inform

!you that important operating and maintenance instructions are in-

cluded in the literature accompany- ing this product.

READ THIS FIRST

We have designed your system to conform to federal regulations, and you can connect it to most telephone lines. However, each device you con- nect to the phone line draws power from the phone line. We refer to this power draw as the device’s ringer equivalence number, or REN. The REN is on the bottom of your answer- ing system.

If you are using more than one device on the line, add up all the RENs. If the total is more than five, your phones might not ring and your answering system might not answer. In rural ar- eas, a total REN of three might impair ringer operation. If ringer operation is impaired, remove a device from the telephone line.

FCC STATEMENT

Your answering system complies with Part 68 of FCC Rules. You must, upon request, provide the FCC registration number and the REN to your phone company. Both numbers are on the bottom of your answering system.

Note: You must not connect your an- swering system to:

Coin-operated systems

Party-line systems

Most electronic key phone sys- tems

3

Image 3
Contents TAD-1018 Features Answering SystemTelephone FCC Statement Read this FirstContents Installation Selecting a LocationLoading Cassette Recording the Outgoing Message Connecting PowerChecking the Outgoing Message Mounting the Phone on the Wall Placing the Phone on a Desk TOPPage Setting the Dialing Mode Setting the Number of RingsTurning OFF/ON the Ringer Page Telephone Operation Using PauseUsing Redial Using FlashUsing Tone Services with a Pulse Line Setting the PHONE’S VolumeAnswering System Operation Setting the Answering System to Answer CallsSetting Recording Time Setting the Answering SYSTEM’S VolumePlaying Messages Screening CallsPage Remote Control Operation Remote PlaybackErasing Messages Remote ANSWER-ON Problem Cause Solution TroubleshootingProblem Cause Solution Care and Maintenance Lightning FCC Wants YOU to KnowPage RadioShack Division of Tandy Corporation Fort Worth, Texas