2.Plug the supplied AC adapter’s barrel plug into the DC IN 9V jack.
3.Route the adapter cord through the upper and lower grooves and the modular cord through only the upper groove on the bottom of the base.
5.Plug the adapter into a standard AC outlet. The POWER indicator on the base lights.
Upper
Grooves
Lower |
Groove |
4.Plug the modular cord’s other end into the wall plate jack, then align the base’s keyhole slots with the wall plate studs and slide the base downward to secure it.
6.Press and lift out the handset holder, rotate it 180°, then snap it back into place so it holds the handset.
9