Radio Shack 43-5560 owner manual From Talk mode

2.Press talk/FLASH or SPEAKER. The displayed phone number dials automatically.

From Talk mode

1.Press talk/FLASH or SPEAKER.

2.View the Caller ID message you want to dial (see “Viewing the Caller ID List” on page 39).

3.Press the DIAL soft key. The displayed phone number will be dialed.

Long Distance calls and Area Code Setting/Cancellation

While the present Caller ID information is displayed, pressing*/tone/< will place or remove the prefix “1” in the display to set the call for a long distance call, or pressing #/> will set or cancel an area code (see “Setting the Area Code” on page 23). Ô

Storing Caller ID messages in the Phonebook

Messages shown in the Caller ID list can be stored in the phonebook. The phone number and name of the party on the Caller ID list can be stored in memory. Ô

1.When the phone is in standby mode, view the Caller ID message to be stored. Then press the STORE soft key.

Store/Edit Name appears.

2.To complete the setting, follow the steps 3-8 in “Storing Phone Numbers, Names, Distinctive Rings, and Speed Dials” on page 31-32.

Ô NOTES Ô

•When a long distance call has been set, 1 appears in the display.

•If a call comes in via a telephone system that does not offer Caller ID service, no information is stored.

•If the Caller ID message was received as a private/unknown number, or the message does not have the number, you cannot store the message in the Phonebook. If it was received as private/ unknown name, the message will be stored as <No Name>.

•Even if the 100 memory locations are full, the message will be stored in the Phonebook. However, the message will be erased from the Caller ID list.

Caller ID

41