2.Press the ENTER soft key to enter DirectLink mode. You will hear a confirmation tone, and DirectLink Mode Complete appears.
3.Press the DirectLink soft key.
4.Select the handset to which you wish to DirectLink with by pressing the number keys
5.On the receiving handset, press talk/FLASH, the ANSWER soft key or if Anykey Answer is on, press any number key,*/tone/< or #/>.
6.When you finish your conversation, press end or the END soft key on either handset. Return the handset to the cradle, or press the CANCEL soft key and then the OK soft key to return to normal standby mode. (cancelling DirectLink mode).
INTERCOM/CALL TRANSFER FEATURE
You can use handsets as an intercom. Also, you can place an outside call on hold and transfer the call to another handset. Ô
Intercom
1.Press INTCM/HOLD in standby mode.
2.Select the handset you want to talk with from the selection list within 30 seconds. To select the handset, press
VOL/RING/ 
or VOL/RING/ 
, and then press the OK soft key. If you select All, all handsets will be paged. An intercom tone sounds.
Ô NOTES Ô
•If the party is busy or out of range, the handset returns to standby mode.
•If any of the following occurs while selecting the other handset, the operation will be cancelled.
-talk/FLASH or SPEAKER is pressed.
-An outside call, intercom or page is received.
•When the party does not answer within one minute, the operation is cancelled.
Expanding Your Phone
45