![](/images/new-backgrounds/1236515/23651531x1.webp)
Chain-Dialing Service
Numbers
For quick recall of numbers for special services (such as alternate long dis- tance or bank by phone), store each group of numbers in its own memory location.
To use the stored special service infor- mation, dial the service’s main number first. Then, at the appropriate place in the call, press MEM and the number for the location where the additional infor- mation is stored.
Testing Stored Emergency Numbers
If you store an emergency service’s number (police department, fire de- partment, ambulance) and you choose to test the stored number, make the test call during the late evening or early morning hours to avoid peak demand periods. Also, remain on the line to ex- plain the reason for your call.
USING A HEADSET
You can make or answer calls with
16
To connect the headset, pull open the
rubber cover marked on the side of the handset, then insert the headset’s
Notes:
•Connecting a headset discon- nects the handset’s earpiece and microphone.
•VOLUME on the handset (see “Setting the Handset Volume” on Page 12) also controls the con- nected headset’s volume.
•If you place the handset on the base to recharge it while the headset is connected, be sure the handset seats properly.
With a headset connected, you make or answer calls as usual using the keys on the handset.
When you finish using the headset, disconnect it from the handset and close the rubber cover to protect the jack.