Samsung 88" Flat QLED TV Q9F QE88Q9FGMT Test), Settings, Settings Sound, Dolby Digital+, Start Sound Test, Run Start Sound Test, Sound Expert Settings, Sound Output to TV Speaker

I Can't Hear the Sound Clearly

When the TV has difficulties with sound, these steps may help resolve the problem.

Testing the sound

Settings Support Self Diagnosis Start Sound Test Try Now

If the TV plays the Start Sound Test melody without distortion, there may be a problem with an external device or the broadcast signal's strength.

The problem				Try this!
There is no sound or the	Check the volume control of the device (cable or satellite box, DVD, Blu-ray, etc.)
sound is too low at maximum
	connected to your TV.
volume.
	Set	Settings Sound	Sound Output to TV Speaker.
	If you are using an external device, check the device’s audio output option. (For example,
	you may need to change your cable box’s audio option to HDMI if the box connected to your
The picture is good but there	TV is using an HDMI cable.)
	To listen to computer sound, connect an external speaker to the computer’s audio output
is no sound.
	connector.
	If your TV has a headphone jack, make sure there is nothing plugged into it.
	Reboot the connected device by disconnecting and then reconnecting the device’s power
	cable.
	Check whether the Digital Output Audio Format is set to Dolby Digital+ in
No sound is heard.	Settings	Sound Expert Settings		Digital Output Audio Format. If you are using a
	receiver that does not support Dolby Digital Plus, you will hear no sound when you select
	Dolby Digital+.
	Make sure that the audio cable is connected to the correct audio output connector on the
	external device.
The speakers are making an	For antenna or cable connections, check the signal information. A low signal level may
odd sound.	cause sound distortions.
	Run Start Sound Test (		Settings	Support Self Diagnosis Start Sound
	Test).

- 99 -