Example:

Set the On-time to 6:15 AM and program the S9OT not to turn on automatically on Sundays.

COFFEE READY

Push the Rotary Dial until the display shows MAINTENANCE.

Turn the Dial until the display shows UNIT ON/OFF.

Push the Dial UNIT ON --.--, push again UNIT ON --.--.

Turn the dial to set the hours UNIT ON 6:00 AM and push the Dial to confirm. UNIT ON 6:00 AM.

Turn the Dial to set the minutes UNIT ON 6:15 AM and push to confirm. CONFIRMED , then UNIT ON 6:15 AM.

Turn the Rotary Dial until ON/OFF / MON YES is displayed and push ON/OFF / MON YES.

Turn the dial until ON/OFF / SUN YES is displayed and push ON/OFF / SUN YES.

Turn the dial until display shows ON/OFF / SUN NO and push to confirm CONFIRMED and then ON/OFF / SUN NO.

Turn the dial to EXIT and push. The display shows ON/OFF / MON YES.

Turn the dial to EXIT and push. COFFEE READY.

14.6 AUTO-OFF

The S9 OT is pre-set to turn itself off 5 hours after last use. You can change the auto-off interval between 0.5 and 15 hours or you can set the machine not to turn itself off. Recommendations: If you only use the machine in the morning, change the auto-off to 2 hours. If you use the machine all day long, leave the auto/off as is. This way the machine is always ready, and it is not necessary to turn it on and to warm up.

Example:

Change the auto-off from 5 hours to 2 hours after last use.

COFFEE READY.

Push the Rotary Dial until the display shows MAINTENANCE.

Turn the Dial until the display shows OFF AFTER 5 H.

Push the Dial OFF AFTER 5 H.

Turn the dial until display show OFF AFTER 2 H and push to

confirm. CONFIRMED , OFF AFTER 2 H.

• Turn the dial to EXIT and push. COFFEE READY.

14.7 RINSE SETTINGS

This program allows you to change both the Rinse cycle and the Cappuccino Rinse cycle.

Rinse cycle (INIT RINSE)

After turning the machine on with the On/Off button, the S9 OT heats up and then prompts you to run a short rinse cycle (chapter 8). You can re-program this function so that this rinse cycle is done automatically.

Example:

Change the initial rinse cycle from manual to automatic:

COFFEE READY.

Push the Rotary Dial until the display shows MAINTENANCE.

Turn the Dial until the display shows RINSES and push the dial. INIT RINSE MANUAL.

Push the dial again, INIT RINSE MANUAL and turn to INIT RINSE AUTO and push to confirm. CONFIRMED

then INIT RINSE AUTO.

Turn the dial to EXIT and push the dial RINSES.

Turn the dial to EXIT and push COFFEE READY.

28.

Page 28
Image 28
Jura Capresso 68193 warranty Auto-Off, Rinse Settings, Rinse cycle Init Rinse