If you use the frothXpress extensively or forgot to clean it, milk fat starts building up inside the frothXpress. In this case use the Cappuccino Cleaner liquid in the Welcome Pack.

Run a CLEAN CAPPUCCINO cycle as follows:

COFFEE READY.

Push the Rotary Dial until the display shows MAINTENANCE.

Push the Dial again, CLEAN CAPPUCCINO.

Push the Dial again. CLEANER FOR CAPPU. The Rinse button illuminates.

Pour approx. 5 oz. of water into a container and add one capful (15 ml or 1/2oz.) of the Cappuccino Cleaner liquid.

Immerse one end of the long milk hose into the cleaning solution and insert the other end into the frothXpress. Turn the frothXpress Dial to the 12 o’clock position.

Place a container under the frothXpress (Fig. 4).

Push the rinse button. CAPPUCCINO CLEANS. The S9 OT siphons the cleaning solution through the frothXpress and stops automatically.

When the display shows WATER FOR CAPPUCCINO, remove both containers and empty. Fill fresh water into one container and insert the hose again. Place the other empty container under the frothXpress.

Push the Rinse button again. CAPPUCCINO CLEANS. The S9 OT will siphon fresh water through the frothXpress, removing the cleaning solution. COFFEE READY.

Squeeze the bottom of the venting tip (Fig. 17a) to make sure it is clean.

You can also immerse the frothXpress parts (except the chrome plated face) into a cappuccino cleaner solution as follows:

Remove the frothXpress from the steam nozzle.

Take the frothXpress apart (Fig. 17a) and set the chrome plated face aside.

Place all parts other parts including the hose in a cup with warm water and add one cap-full (15 ml or 1/2oz.) of the cappuccino liquid.

Let sit for ten minutes or overnight.

Rinse all parts under fresh water and assemble.

16. AUTOMATIC CLEANING CYCLES

16.1 CLEANING WITH SPECIAL TABLET

The machine monitors how many coffees are brewed and how often the rinsing program is activated. After approx. 220 coffees the display shows COFFEE READY / CLEAN MACHINE. You can continue brewing coffee, however we highly recommend that you clean the machine as described below within the next few days. This cleaning program will remove oil build-ups in the brewing chamber. If the display shows CLEAN NOW clean the machine immediately.

This cleaning program takes about 20 minutes. Please use the enclosed white cleaning tablet. The machine comes with a pack of 2 tablets. To re-order see chapter 20.

Important: Once the cleaning program has started do not interrupt the procedure.

COFFEE READY / CLEAN MACHINE

1.Push the Rinse button. DURATION 20 MIN. / START YES. Please note: To clean the S9 OT at a later time, turn the Rotary Dial until the display shows START NO. Push the Rotary Dial to

32.

Page 32
Image 32
Jura Capresso 68193 warranty Automatic Cleaning Cycles Cleaning with Special Tablet