can resume brewing coffee.

Make sure the Dual Coffee Spouts are moved upwards. Carefully lift and pull out the removable drawer (Fig. 18 and 19). TRAY MISSING. There is water in the drawer. Empty the drawer and the used coffee container, assemble and replace. Make sure the two metal contacts of the drawer are clean and dry.

Please note: If the machine is not used for a few days, pull out the tray and empty the used coffee container. Used, moist coffee grounds can develop mold and mildew.

Important: If you pull out the drawer without any corresponding message in the display you must empty the used coffee container. The machine assumes that it will be emptied. If you do not empty the container, used coffee will overflow inside the machine and cause serious damage to the coffee release mechanism.

Please note: The machine does not sense if the used coffee container (Fig. 1,16) is inserted. If the used coffee container is not inserted, ground coffee discharges onto the drawer.

TRAY MISSING

Insert the drawer with the empty used coffee container. Make sure the metal contacts in the back of the drawer are clean and dry.

FILL BEANS

Add beans to the bean container.

COFFEE READY / CLEAN MACHINE

After approx. 220 coffee brewings or 80 initial rinsing cycles you must run a tablet cleaning cycle. You can still make coffee, how- ever we highly recommend to perform the cleaning cycle within the next few days (chapter 16.1).

COFFEE READY / CLEAN NOW

After 30 more coffee brewings the message reads CLEAN NOW.

COFFEE READY / DECALCIFY MACHINE

It is time to decalcify the machine. You can still make coffee, however we highly recommend to perform the decalcifying cycle within the next few days (chapter 17.1).

Please note: If you use the Clearyl cartridge and the message appears, then your cartridge function was not activated. Follow the instruction in chapter 13a to program and activate the cartridge. If the cartridge is already in use for several weeks install a new cartridge.

COFFEE READY / DECALCIFY NOW It is urgent to decalcify the machine.

COFFEE READY / CHANGE FILTER

It is time to replace the Clearyl filter (chapter 13b).

NOT ENOUGH PRE-GROUND

Not enough pre-ground coffee was filled into the ground coffee funnel (Fig. 1,11). The S9 OT stops the operation (chapter 9e).

15.1 MANUAL MAINTENANCE CYCLES

The S9 OT will display when it’s time to perform certain cleaning programs. You can also manually access these programs and perform them.

COFFEE READY.

Push the Rotary Dial until the display shows MAINTENANCE.

Push the Dial again, CLEAN CAPPUCCINO.

Turning the dial shows you which programs you can access: CLEAN CAPPUCCINO (chapter 15.5)

RINSE MACHINE (see example below in chapter 15.1) RINSE CAPPUCCINO (chapter 10g)

CLEAN MACHINE (chapter 16.1) DECALCIFY MACHINE (chapter 17.1) CHANGE FILTER (chapter 13c)

30.

Page 30
Image 30
Jura Capresso 68193 warranty Tray Missing, Fill Beans, Coffee Ready / Clean Machine, Coffee Ready / Clean NOW