Jura Capresso 68193 PLEASE, do, Factory Settings / Options, XMILD, MILD, NORMAL, STRONG, Xstrong

•Never fill anything but fresh, cold clean water into the water container, except when decalcifying (chapter 17.1).

•Never use mineral or carbonated water. You can use tap water, bottled water, spring water, distilled water and reverse osmosis water.

•Never repair or open the machine yourself. All repairs should be performed only by an authorized service center.

•Do not place the machine on a surface which is sensitive to hot or cold water and steam. Never place the machine on an uneven surface.

PLEASE, DO...

•Fill water tank daily with fresh, cold water.

•Before filling the bean container, remove any foreign particles (small stones) from coffee beans.

•Let frozen beans thaw for 3 to 4 hours before pouring them

into the bean container.

Important: If you pull out the drawer at any time you must empty the used coffee container and the drawer. If you do not empty the container, used coffee will overflow inside the machine and can cause serious damage to the internal mechanism.

5. FACTORY SETTINGS / OPTIONS

The IMPRESSA S9 One Touch can be set up in many different ways. Beverages, on/off settings, temperature, rinse cycles, water treatment, energy savings modes and display information can be programmed to your personal preferences.

Beverage buttons can be customized with regards to volume (cup size), coffee strength (AROMA), temperature, duration of milk steaming/frothing.

Coffee volume:

•All 1-cup buttons can be programmed to brew between

0.5and 8 oz. of coffee.

•The Hot Water Portion can be programmed to dispense up to 15 oz. of hot water.

•All 2-cup buttons can be programmed to brew between

0.5and 8 oz. per cup, total of 16 oz. max.

Tip: if you use a 12 oz. mug and program one of the 2-cup buttons to 5 oz. the S9 OT will brew a total of 10 oz. of coffee into your mug.

Coffee strength (AROMA):

•All 1-cup buttons can be set to five different coffee strengths:

XMILD, MILD, NORMAL, STRONG, XSTRONG.

In XMILD the conical burrs grind for approx. 5 seconds, in XSTRONG, the grinding takes about 9 seconds.

•When using the 2-cup buttons, the S9 OT will always grind in

XSTRONG.

Please note: The display indicates the five strength settings with graphics showing from one to five coffee beans.

Temperature:

•All coffee buttons can be set to NORMAL or HIGH.

•The Hot Water function can be set to LOW, NORMAL, XHIGH (XHIGH is used for pre-warming cups and for specialty teas).

Steaming for milk frothing:

• The cappuccino and latte macchiato buttons and the milk portion can be set to produce steam from 3 to 120 seconds.

Latte Macchiato Pause:

•The pause between milk frothing and coffee brewing can be set from 0 to 60 seconds.

13.