Radio Shack ET-919 owner manual Setting the HANDSET’S Volume, Using Redial, Using Flash

Press MUTE during the call. The MUTE indicator on the handset lights steadily.

MUTE

Indicator

Press MUTE again to resume your phone conversation. The MUTE indica- tor turns off.

SETTING THE HANDSET’S VOLUME

You can select one of three different vol- ume settings (soft, normal, loud) using VOLUME s or t during a call.

1.Lift the handset and press TALK. The TALK indicator lights.

2.Repeatedly press VOLUME s to increase the volume level or VOL- UME t to decrease it.

Note: Every time you press VOL- UME s or t, the ET-919 beeps, except when it is already at the loud- est or softest volume level.

USING REDIAL

To quickly redial the last number dialed, press TALK. Then when you hear the dial tone, simply press REDIAL.

Notes:

•The redial memory holds up to 16 digits, so you can redial long- distance as well as local numbers.

•The redial memory also holds pause entries. See “Entering a Pause” on Page 17.

•The redial memory does not store a flash entry or any digits you press after FLASH (see “Using Flash”).

USING FLASH

FLASH performs the electronic equiva- lent of a switchhook operation for spe- cial services, such as Call Waiting.

15